Algfail(763 × 689 pikslit, faili suurus: 361 KB, MIME tüüp: image/jpeg)

Lühikirjeldus

Kirjeldus
English: This picture is an end-on shot of a variety of moulding planes I own.

The top 5 planes in the picture have no blades, but these are easy to make from good steel, as are any missing blade clamps from wood offcuts. The craftsmen who used to use these tools expected to remake blades periodically. Two of those planes have the wooden blade clamp.

The bottom 10 planes have blade and blade clamp.

Individual descriptions where there is something special to say! So any maker's or owner's mark will be described here. I'll describe by counting from the left, with the left hand plane in each row being numbered 1.

Top row

1 - Stamped "Summers Varvill Ebor Works York" on one end and 10 on the other
2 - Stamped "Summers Varvill Ebor Works York" on one end and 16 on the other
3 - Stamped "Summers Varvill Ebor Works York" on one end and 12 on the other
4 - Stamped A Mason (owner's mark?)
5 - Stamped "Varvill & Son York" on one end and "BEAD" on the other along with a 12

Bottom row

1 - No markings
2 - Stamped "Summers Varvill Ebor Works York" on one end and 14 on the other
3 - Stamped "G Townsend" on each end and overstamped "G Haynes"
4 - Stamped "Wm Moss" and "W Beddow" on one end and "1/4" (aligned vertically as a fraction) on the other. Either at manufacture or later this plane has part of the pattern made from two wood fillets that are screwed (or perhaps bolted - I have not removed the screws) to the body
5 - Stamped "Summers Varvill Ebor Works York" on one end and 6 on the other
6 - Stamped "Ames London" in stylised script and "W Lissaman" on one end, and "W Lissaman" and 18 on the other
7 - Stamped "Summers Varvill Ebor Works York" on one end and 6 on the other (the profile is nothing like the other one that is stamped "6")
8 - Stamped "G Davis" and "P Jones" on one end and 10 on the other
9 - Stamped "B Baker" on the left side. This plane has a vertical metal profile piece inset into its leading edge. There is indecipherable possible wording on the metal

10 - nothing at all. May be a rebate plane since it has exposed blade sides, but there is no depth stop.
Kuupäev 28. november 2007 (algne üleslaadimiskuupäev)
Allikas Projektist en.wikipedia Commonsisse teisaldatud.
Autor Timtrent inglise Vikipeediast

Litsents

Timtrent inglise Vikipeediast autoriõiguse omanikuna avaldab selle teose järgmiste litsentside all:
GNU head Luba on antud selle dokumendi kopeerimiseks, avaldamiseks ja/või muutmiseks GNU Vaba Dokumentatsiooni Litsentsi versiooni 1.2 või hilisema Vaba Tarkvara Fondi avaldatud versiooni tingimuste alusel; muutumatute osadeta, esikaane tekstideta ja tagakaane tekstideta. Sellest loast on lisatud koopia leheküljel pealkirjaga "GNU Free Documentation License".
w:et:Creative Commons
omistamine sarnaselt jagamine
See fail kuulub Creative Commonsi jurisdiktsiooniga sidumata litsentsi "Autorile viitamine + jagamine samadel tingimustel 3.0" ning üldise litsentsi "Autorile viitamine + jagamine samadel tingimustel" versioonide 2.5, 2.0 ja 1.0 alla.
Tohid:
  • jagada – teost kopeerida, levitada ja edastada
  • kohandada – valmistada muudetud teoseid
Järgmistel tingimustel:
  • omistamine – Pead materjali sobival viisil autorile omistama, tooma ära litsentsi lingi ja märkima ära, kas on tehtud muudatusi. Sobib, kui teed seda mõistlikul viisil, kuid seejuures ei tohi jääda muljet, et litsentsiandja tõstab esile sind või seda, et sina materjali kasutad.
  • sarnaselt jagamine – Kui töötled, kujundad ümber või arendad materjali edasi, siis pead oma töö levitamiseks kasutama sama litsentsi, mille all on algupärand, või ühilduvat litsentsi.
Sa võid valida endale sobiva litsentsi.

Esialgne üleslaadimislogi

Esialgne kirjelduslehekülg oli siin. Kõik järgmised kasutajanimed viitavad projektile en.wikipedia.
Kuupäev/kellaaeg Mõõtmed Kasutaja Kommentaar
2007-11-28 18:50 763×689× (369799 bytes) Timtrent This picture is an end-on shot of a variety of moulding planes I own. The top 5 planes in the picture have no blades, but these are easy to make from good steel, as are any missing blade clamps from wood offcuts. The craftsmen who used to use these tool

Pealdised

Lisa üherealine seletus sellest, mida fail esitab

Selles failis kujutatud üksused

kujutab

Faili ajalugu

Klõpsa kuupäeva ja kellaaega, et näha sel ajahetkel kasutusel olnud failiversiooni.

Kuupäev/kellaaegPisipiltMõõtmedKasutajaKommentaar
viimane28. november 2015, kell 00:11Pisipilt versioonist seisuga 28. november 2015, kell 00:11763 × 689 (361 KB)TimtrentTransferred from en.wikipedia

Seda faili kasutab järgmine lehekülg:

Globaalne failikasutus

Järgmised muud vikid kasutavad seda faili:

Metaandmed